[[mvme:rack001]]

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
mvme:rack001 [2019/07/21 09:43]
dashie [Diagnostics]
mvme:rack001 [2019/11/26 12:13] (current)
dashie
Line 6: Line 6:
  
   * 2U, power supply integrated with monitor, 2x5A fuse, power by key   * 2U, power supply integrated with monitor, 2x5A fuse, power by key
-  * Floppy drive (SCSI)+  * Floppy drive (SCSI), TEAC FC-2
   * HDD (SCSI)   * HDD (SCSI)
-    ​Maxtor 73455R +  ​Rack modelRackPak/3 https://www.powerbridge.de/​download/​manual/​vme/​vme-chassis/​RackPak34.pdf
-    * 209MB +
-    * Date10-06-94 +
-  * OS9 SWD 192.168.3.182+
  
-===== Diagnostics ===== 
- 
-No serial output at all, either with CPU board only, plus memory, or all. 
- 
-Backplane is OK, tested a MVME 162-01 and the board powers up correctly. 
- 
-Serial console 2 on back works with the 162-01, so the 1 should works too, that exclude a backplane/​connectors issue. 
- 
-No 167bug yet to test. 
- 
-Fail test: 
-  * Wrong SRAM: fail steady 
-  * Spare SRAM no reset: fail blink 
-  * Spare SRAM and orig SRAM + reset: no fail 
 ===== Back ===== ===== Back =====
- 
-==== IOP 506 ==== 
- 
-| J639 B1 DB15 | J639 B2 DB15 | J639 B3 DB15 | J75 GPIB | 
-| J639 C | J639 D | J639 D1 | 
- 
-  * J639 B1, B2 and B3 are "IP DAC 2" (external connector on the GreenSpring) 
-  * The GPIB is the internal IP on the left 
-  * J639 C is "IP ADIO A", on external connector of the GS 
-  * J639 D and D1 is "IP ADIO B", on internal connector of the GS 
  
 ==== MVME 712/M ==== ==== MVME 712/M ====
Line 43: Line 16:
 http://​www.m88k.com/​mvme712m.html http://​www.m88k.com/​mvme712m.html
  
-| Serial port 1 console | Serial port 2 TTY01 | SCSI |+| Serial port 1 console | Serial port 2 TTY01 | SCSI |
 | Serial port 3 | Serial port 4 | AUI Ethernet | printer | | Serial port 3 | Serial port 4 | AUI Ethernet | printer |
  
 ==== Störung ==== ==== Störung ====
  
-Deport for ledssysfail, etc.+Connector removedwill be used with the MVMEPI later instead.
  
 ===== Front ===== ===== Front =====
  
-  ​* GreenSpring (IndustryPack card) +  * Xycom XVME-203 ​(later)
-  ​* Xycom XVME-203 +
-  * COVER BRACKET +
-  * MVME 225-2+
   * MVME 167A   * MVME 167A
  
-==== MVME 167A ====+==== MVME 167-04A ​==== 
 + 
 +  * [[mvme:​167-04A|167-04A]] : Boots
  
   * 040 68k   * 040 68k
-  * 8M memory +  * Installed: 32M memory ​mezzanine, 01-W3800B-04A 
-  * Ethernet, SCSI +  * Ethernet ​(00 00), SCSI (LUN 07) 
-  * Eth 08:00:3E:21:38:70+  * Eth 08:00:3E:22:77:53
   * Eproms:   * Eproms:
-    * XU1: MSM27C202J; OS9 167; H-V2.4 +    * XU1: bug 2.2 
-    * XU2: MSM27C202J; OS9 167; L-V2.4+    * XU2: bug 2.2
     * XU3: empty     * XU3: empty
     * XU4: empty     * XU4: empty
- 
-==== MVME 225-2 ==== 
-  * 4M 
-  * 0820 - 0000 
  
 ==== Xycom XVME-203 ==== ==== Xycom XVME-203 ====
Line 79: Line 47:
   * http://​www.xycomkorea.com/​pdfs/​usermanuals/​xvme/​XVME203.PDF   * http://​www.xycomkorea.com/​pdfs/​usermanuals/​xvme/​XVME203.PDF
  
-==== GreenSpring ​==== +===== Fans =====
- +
-  * 4 IndustryPack card +
-  * IP A: Empty +
-  * IP B: IP-448, GPIB, config: 000001 +
-  * IP C and D: IP-ADIO, Analog Input/​Output+
  
 +<​code>​
 +PAPST
 +TYP 612
 +12VDC (6-15V)
 +2.5W
 +60x60x25
 +</​code>​
  
 +From PAPST, 612 has multiple models:
 +  * qV airflow:
 +    * min: 19 m3/h
 +    * max: 42/56 m3/h
  
 +Replacement:​ https://​noctua.at/​en/​products/​fan/​nf-a6x25-flx/​specification
 +NF-A6x25-PWM,​ 29.2 m3/h
  
 +The fan on the PSU side is pushing inside, the fan on the SCSI side is pushing outside.
  
  
  • mvme/rack001.1563695037.txt.gz
  • Last modified: 2019/07/21 09:43
  • by dashie