Sommerkamp FRdx500

Published on 2022-04-18 and last edited on 2022-04-23.

Tubes are over-powered and overheat, alignment necessary.

⚓ Infos

⚓ État

  • Fonctionnement moyen, tubes sur-alimentés
  • Tous les contacts sont passés au nettoyant contact
  • 160m : muet
  • 80, 40, 20, 15 : ok
  • 10 A, B, C, D : semble ok
  • WWV : une résistance a fait pouf, remplacée.
  • CB : Pas testé cf. WWV
  • Topic sur la restauration: http://antiqueradios.com/forums/viewtopic.php?f=5&t=324225

⚓ Décalages / Offsets

  • F. finale = F. lue + l’offset
  • 3970KHz lu, bande des 80m, ajouter 5KHz, donne 3975KHz
BandeOffsetNote
40m-5KHzValidé avec deux stations fortes
80m-5KHzValidé avec deux stations fortes

⚓ Tubes

⚓ References

TubeQtyBoughtFromNotes
6 BZ626BZ6/6JH6 - Pentode, Semi-Remote Cut-OffAntic Electronic Supplies
6 U826KD8/6U8A - Triode - PentodeAntic Electronic Supplies
6 BE615750/6BE6W - HeptodeAntic Electronic Supplies
6 BA625749/6BA6W - Pentode, Remote Cut-OffAntic Electronic Supplies
12 AT7212AT7 ChinaAntic Electronic Supplies
6 BM81“Hi-Fi”

To buy : 1x 12AT7, 1x 6BM8 (V106 & V108)

⚓ Sockets

SocketQty
7P5
9P3

⚓ Modifications à faire

⚓ Quartz pour Fix Oscillator

  • 4, inconnus

⚓ Filters

  • MF455-03AZ (600cps)
  • MF455AO50F (5 kc)
  • MF455A240F (24kc)
  • Trouver les var-cap associés (G27, P278)

⚓ Mods & Options

⚓ 100Kc / 25Kc Marker

  • Wiring in the FRDX
    • White wire : +13V (to check) DC, power
    • Green wire : 25Kc output from marker
    • Yellow wire : 100Kc output from marker

⚓ Troubleshoot

⚓ 01/04/2020

Did some measurements, tube V106 pins are off:

  • 1, expected 80, got 102
  • 6, expected 200, got 227
  • 7, 210, 239
  • 8, 105, 123
  • 9, 175, 234

Ordered replacement caps for C179 and the two 0.01uF on the transformer.

Replaced C187, 1uF measured 1785nF on the cheap tester.